Finding your air
conditioner facing the sudden malfunctioning is the worst thing to experience
in the summer season. It is possible that your AC is running quietly for a long
time but it is not blowing the cold air. This is the moment when you need to
opt for some troubleshooting fixes for your HVAC system. It is always a wise
option to take help from HVAC service providers and professionals. And for that
sake, we have the best recommendation for you as American
Air Services. They will enable you better to know all those
fixes which are necessary for the proper functioning of the HVAC system.
Right through this guide,
we will explain to you a few of the reasons that why your AC is not blowing
cold air and what you should do to fix it. Let’s get into the discussion below:
Power
Issues
A power issue is one
major factor that might be a hurdle for your AC system to function properly.
You should check carefully if the AC system has been plugged into the outlet
correctly and if the power cord has been intact or not.
But if the cord and
outlet are fine, then it is the electrical panel where you are facing an issue.
AC systems are having a larger surge of power and hence your unit would have
blown with the fuse or the breaker has been tripped.
Clogged
filter
Some of the AC units are
having a built-in mechanism that can shut down the unit if the filter has been
clogged. This is merely done just to prevent any sort of damage to the motor or
causing overheating. So, give a check to your unit filter and clean it or
replace it if required.
Ice
buildup
There are quite a few
reasons due to the ice buildup in the AC system. It can be either due to the
poor filter airflow, dirty coils, or the lack of refrigerant. You should put
some effort and clean the AC filter or the coils for bringing a set of
improvements in the airflow troubleshooting.
If there is a buildup of ice in the unit, just turn on the fan and let
the ice melt off.
Dirty
compressor
When it comes to regular
maintenance, you should clean the area which is around the compressor to cover
it during the winter season. It might be possible that over the years, debris,
leaves, and dirt have build-up inside it. For the cleaning task, you should
always take a professional helper service. Make sure the unit is shut off
before you start your cleaning process.
Condensate
airflow switch
Some of the air handlers
contain the integrated safety float switch where they trip and simply shut off
the unit as soon as the drainpipe gets backed up with water. If the switch has
been tripped, you should be resetting it after the condenser drainpipe has been
fully cleaned.
Conclusion
Well by following the
above-mentioned troubleshooting fixes, we are sure that you will find it a lot
easy to fix your AC system for better cooling performance. Do hire a
professional expert besides fixing the things on your own.
No comments:
Post a Comment